Do you know how to choose the right auto parts packaging box?- Jiaxing Hengchuang Packaging Technology Co., Ltd.

Choosing the right auto parts packaging box can make a huge difference in how parts are handled and stacked. By ensuring the box you choose meets all required standards, you can be sure your parts will arrive in perfect condition. These boxes can be designed to serve multiple functions, so you can be sure your parts will be safe and protected while in storage. These include VCI material, SBS partitions and fibreboard, which is a multi-layer board with a kraft paper lining on each surface. These features all provide peace of mind knowing that your metal goods arrive in the same condition as they left the manufacturer's warehouse.

Fibreboard is a multi-ply board with a kraft paper lining on each side

Traditionally, corrugated cardboard is made of three layers of kraft paper. These three layers are grooved and lined with an inner or outer lining. This corrugated cardboard is usually used to make corrugated boxes.

This material is usually heavier and stiffer than cardboard. This material has good moisture resistance and pressure resistance. Depending on weight, it is available with single-ply, multi-ply and double-ply calipers. It is commonly used in corrugated boxes as well as large flexible packaging.

The inner and outer linings are usually pulp or newsprint board. These materials provide a better finish. They also compensate for irregularities in the sealing surfaces.

During the manufacturing process, the boards are sanded smooth. It is then glued together with a cornstarch-based adhesive. The result is a strong, durable and strong material that resists rips and tears.

The material is made from recycled paper fibers. Pulp is recycled from damaged cardboard or off-spec products. The cardboard is then sanded down to a smooth finish.

In addition to strength and durability, the air in the cardboard provides great cushioning for the contents. Often, during the drying process, air pockets are created in the board. These pockets can be difficult to remove. Dry spray with finely powdered starch to prevent ink transfer to backing paper.

The paper is then passed between rollers to add gloss. The printed surface is protected with varnish. Some manufacturers use a non-slip coating, widely used in multi-layer bags.

In the printing process, primary colors are used. Additionally, a dampening solution is applied to the printing plate. This fountain solution is transferred to the printing plate during printing, preventing ink from migrating to non-printing areas.

E-flutes are typically 1 to 1.5mm thick and offer excellent compression resistance. It is common in smaller cartons as well as in die-cut applications. It's also a good all-around choice for all types of wraps.

Another way to keep metals from rusting is to use vapor corrosion inhibitors. These compounds are injected into the packaging material and evaporate to form a thin barrier on the metal surface. It is important to choose a film that is strong enough to protect your metal items. They should be stored in a cool, dry place out of direct sunlight and replaced at least once a year.